Free Shipping Included! Godox Xpro-C E-TTL II 2.4G X System Wireless Control Remote Trigger with 2X X1R-C Controller Receiver Compatble for Canon Flash by Godox at Spotlight Mind. MPN: Godox. Hurry! Limited time offer. Offer valid only while supplies last. SPECIFICATION: Model:Xpro-C Compatible cameras: Canon EOS cameras (E-TTL II autoflash)Support for the cameras that have PC sync socket. Power supply: 2*AA batteries Flash Exposure Control: E-TTL II Manual flash: Yes Stroboscopic flash：Yes High-speed sync：Yes Second-curtain sync :Yes Flash exposure compensation: Yes. ±3 stops in 1/3 stop increments Flash exposure lock: Yes Focus assist: Yes Modeling lamp: Control the modeling lamp by the flash trigger Beeper: Control the beeper by the flash
Product Description & Reviews
SPECIFICATION: Model:Xpro-C Compatible cameras: Canon EOS cameras (E-TTL II autoflash)Support for the cameras that have PC sync socket. Power supply: 2*AA batteries Flash Exposure Control: E-TTL II Manual flash: Yes Stroboscopic flash：Yes High-speed sync：Yes Second-curtain sync :Yes Flash exposure compensation: Yes. ±3 stops in 1/3 stop increments Flash exposure lock: Yes Focus assist: Yes Modeling lamp: Control the modeling lamp by the flash trigger Beeper: Control the beeper by the flash trigger Wireless setting: The receiver end can control the camera ZOOM setting: Adjust the ZOOM value by the transmitter Firmware upgrade: Upgrade through the Type-C USB port Memory function: Settings will be stored 2 seconds after last Transmission range (approx.): 0-100m Built-in wireless:2.4G Modulation mode:MSK Channel:32 Wireless ID: 01-99 Group:16 Display:Large LCD panel, backlighting ON or OFF Dimension:90x58x50mm Weight:80g Package contents: 1*Godox Xpro-C 1*Product manual2*Godox X1R-C
Features & Highlights
- Xpro-C TTL Wireless Flash Trigger can not only control the flashes with built-in Godox wireless X system, e g. camera flashes, outdoor flashes and studio flashes, but also can control the Cannon original flashes when using in combination with X1R-C receiver. Featuring multi-channel triggering and stable signal transmission, this flash trigger
- Can as a Wireless Godox Flash Trigger / Wireless Canon Speedlites Trigger/ Wireless Shutter Release Trigger/ Flash Trigger with 2.5mm Sync Cord Jack Support E-TTL II Autoflash and Professional Functions
- 16 groups and 32 channels to wirelessly control and trigger. Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively.
- Fully support TTL autoflash. 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation, TCM transform function, magnification function, one-shoot & multi-shcx)t setting, group modeling lamp control, group zooming, adjusting all groups1 output value simultaneously, etc.
- Built-in Godox 2.4G Wirless X System & Versatile Using Methods
4.72 x 5.91 x 4.72 inches
6.6 x 5.1 x 8.3 inches
Have questions about this item (Godox), or would like to inquire about a custom or bulk order?
If you have any questions about this product by Godox, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Godox X2T-F 2.4G wireless transmitter for Fuji Cameras (TTL Autoflash) and flash( also for the cameras that have PC sync socket) Brief Instruction: This wireless flash trigger transmitter model X2T-F can be used for studio flash, speedlite and camera shutter. It applies to Fuji hot-shoe mounted DSLR or Mirrorless series cameras. With this X2T-F wireless flash trigger, high speed synchronization is available for most camera flashes which support TTL. The max synchronization speed can reach to 1/
mpn: YN622N II, ean: 0602747228480,
Main Functions: Support ''622'' communication mode,''603-RX'' communication mode Compatible flash mode: i-TTL, Manual flash Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s Support remote set the parameters of flash through the transceiver (Remote Control Mode) Support i-TTL/Manual/Repeating flash mode mix using(Mix Control Mode) Support the flash installed on transmitter(on-top flash)and supports i-TTL function
mpn: A1, ean: 0704751848309,
MIOPS Splash Water Drop KitCompared to the MIOPS Basic Splash Kit, this package includes the standalone camera-and-flash trigger, a flash cable, and a holder arm dedicated for the Splash unit. The kit comes with a downloadable app for remote controlling. You can freely adjust the waterdrop size and timing (15~24 milliseconds) with the use of the Splash App. The app is compatible with Android and iOS devices that have Bluetooth 4.0 capability.With the help of the holder arm, you can set up the MI
mpn: HH3742, ean: 0723610503425,
More Feautures FE lock 11 Customizable Functions Manual Flash 1/1 - 1/256 Power Modeling Light Status Control Adjusts the Flash Zoom Coverage for Each Group Selective Transmission of Data Conserves Energy and Battery Life Magnification Function Displays Details of Each Group Settings Global Adjustments to Exposure Values for Multi-Group in M Mode 5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation Support Type-C USB Firmware Upgrade and Wireless Triggering by 2.5mm Sync Cord Jac